Combined Metal False Ceiling

What is the combined Ceiling?

The Combined Ceiling is an invisible structure ceiling, In which we use different sections along with each other to create a beautiful false ceiling.

In combined ceiling basically, we use three types of sections:

1.Beam Section

2.Beam Jointer Section

3. Main Tile Section

Advantages:

1. Big scope to create many designs with the help of different alignment, color & combination options.
2. High durability.
3. A wide option of acoustic properties.
4. Ease Access of plenum, no special tool required. 5. Freedom to choose the different sizes of panels.

Material Required:

1.Suspension Rod
2.Main Channel Holder
3.Main Channel

4.Main Channel Jointer
5.Fastener
6.Clip-In Profile

7.Clip -In Tile
8.Clip-In Profile Holder

9.Clip-In Profile Jointer

10.Pressure Clip

11.Edge Profile

Drawing of Connection of Combined Ceiling:

Punching Type:

1. Always keep Beam at the same height on all sides.

2.Install carrier at the space of 1.0-1.2 meter, if the area is small put at least 2 carrier lengths in installation.

3.Always use a suspension rod/angel with a suspension clip.

4.Suspension Rod should be installed at a 1-1.2 meter distance.

5.Panels should be fixed in the carrier properly with the soft hand at 90 degrees of the carrier.

6.Always wear gloves at the time of installation.

7. Do properly clean panel before installation, if safety guard film is there peel off before installation and check for any stain or spots.

Approx Estimated Cost:

G.I. .5 mm thickness plain:-$ 16-18 per sq. meter.

Aluminum.7 mm thickness plain:-$ 18-20 per sq. meter.

S.S .5mm Thickness Plain-$ 35-37 per sq. meter
For different colors, the combination cost may be increased by $ 2 per sq. meter.

Perforation will add $2 in cost also.