84R/84F Metal False Ceiling

What is R Strip Ceiling?

R strip ceiling is a Liner ceiling with round edge panels. The panels are 84mm in width and can have lengths up to 6000mm. In the liner system when we install its looks 84mm in width along with a 16mm gap. So one panel in width covers a total of 100mm space.

What the difference between the 84R and 84F ceiling?

In the 84R ceiling, we leave a 16mm empty gap along with the panel.

In the 84F ceiling, we fill a 16mm gap with the help of a flush profile. So, the full area gets covered, and the plenum develops between the main ceiling and the false ceiling.

Acoustic Properties:-

84R has very good acoustic properties, cause there is a gap between the two panels, so it district and absorb sound waves. if you need more may use a perforated panel with acoustic fleece backside.
84F is a closed ceiling system due to a flush profile, so here for acoustic properties, we have to use the perforated panel with acoustic fleece backside.

Insulation:-

In 84R Ceiling, we may use glass wool pads on the backside of panels to improve insulation properties.84F has good insulation properties due to the plenum between the main ceiling and false ceiling, you may also increase it with the use of glass wool pads on the backside of panels.

Design:-

R strip ceiling looks beautiful due to the linear design of the panel with a 16mm draw line. Here you may use different color panels on an alternative number to make a design impact.

Where should install R Strip Ceiling?

You may install it anywhere R Strip Ceiling, just keep in mind, if you need hygienic properties to go with 84F Ceiling like Restaurant, Cafeteria, Kichan, etc. All other places like the supermarket, office, a public place you may go with 84R.

How select R Strip Ceiling color?

The best color for a false ceiling always white, because it reflects light about 70%, But if you like to go with others you may keep match with your window & doors colors. If you are going with 84R keep contrast with the main ceiling color, it gives a good impact.

Material Required:-

1.84R Panels.

2.Panels Jointer

3.Suspension Rod/Angel

4.Suspension Clip

5.Edge Profile

6.L-clit

7.84R Carrier

8.84R Carrier Jointer

9.Flush Profile(only in 84F)

Hardware:-

1.Fastener

2.Screw/Nail

3.Geti

Drawing of Connection:-

Installation:-

1. Always keep Edge Profile at the same height on all sides.

2.Install carrier at the space of 1.0-1.2 meter, if the area is small put at least 2 carrier lengths in installation.

3.Always use a suspension rod/angel with a suspension clip.

4.Suspension Rod should be installed at a 1-1.2 meter distance.

5.Panels should be fixed in the carrier properly with the soft hand at 90 degrees of the carrier.

6.Always wear gloves at the time of installation.

7. Do properly clean panel before installation, if safety guard film is there peel off before installation and check for any stain or spots.

Estimated Cost:-

84R:

G.I. thickness .5mm:- $12-$14

Aluminium thickness .5mm:- $13-$15mm

84F:-

G.I. thickness .5mm:- $14-$16

Aluminium thickness .5mm:- $15-$17mm