The clip-in metal ceiling is an invisible structure ceiling, In which we use clip-in tiles of different sizes along with clip-in profile, profile in this system get invisible from the bottom sight, only tiles get visible.
Acoustic Properties:Advantages:
1. Big scope to create many designs with the help of different alignment, color & combination options.
2. High durability.
3. A wide option of acoustic properties.
4. Ease Access of plenum, no special tool required.
5. Freedom to choose the different sizes of panels.
2. High durability.
3. A wide option of acoustic properties.
4. Ease Access of plenum, no special tool required.
5. Freedom to choose the different sizes of panels.
For acoustic properties basically use punching in the tile which is called perforation. The standard diameter of the punching hole is 1.8mm and 2.5mm. Those days many types of punching available like square, rectangular, and people with the help of punching creating different designs also on tiles. After perforation to improve more acoustic property, paste non-woven acoustic fleece backside of the tile. These perforated tiles absorb and district both do with sound waves and create acoustic environments.
Insulation Properties:
Clip-in the false ceiling is a closed type ceiling, so it creates a plenum between the main and false ceiling. That's plenum work as an insulator in-ceiling and controls the temperature of the environment. If the project has more requirements of insulation, you may use glass wool or rock wool pads back of the tiles.
Design:
In the clip-in system, the hairline shown between the tiles looks very beautiful. You may also create much design by choosing different color combinations and sizes of tiles
Sizes:
Clip-in tile mostly uses in 600mm x600mm size, but you can use also some other size as the width you may take- 300mm, 600mm,900mm, and length 300mm,600mm,900mm,1200mm. If more than that you go there comes the alignment problem. Here material thickness also plays a measure role in a different size.
How to select the thickness of the material?
Clip-in tile basically made in three types of material-
1. Galivinize Iron
2. Aluminium
3. Stainless Steel
so, our suggestion that:
| Tile Area SqMeter | G.I. mm | Alu mm | S.S mm |
|---|---|---|---|
| Small less than .36 | .4 | .6 | .4 |
| Medium .36-.54 | .5 | .7 | .5 |
| Big more than .54 | .6 | .8 | .6 |
Best Places to Install?
The clip-in system is a fully closed system, due to fixing tiles in the clip-in profile, it becomes a fully hygienic solution from the ceiling side. That's why it becomes the right choice for the places where hygienic important like kitchens, pantries, operation theaters, etc.
Operation theatres mostly use stainless steel clip in-ceiling systems due to magnetic wave interaface.
It may be used in bank, hall, exhibition hall, showrooms, vacant hall, factory, lobby, mall, stadium, cafeteria, restaurant, hotels, etc.
Material Required:
1.Suspension Rod
2.Main Channel Holder3.Main Channel
4.Main Channel Jointer
5.Fastener
6.Clip-In Profile
5.Fastener
6.Clip-In Profile
7.Clip -In Tile
8.Clip-In Profile Holder
8.Clip-In Profile Holder
9.Clip-In Profile Jointer
10.Pressure Clip
11.Edge Profile
Installation:
1. Always install edge profiles at the same height on all sides.
2. Always installing the main c channel carrier 1-1.2 meter space.
3. Always use the suspension rod at a distance of 1-1.2meter.
4. Always insert a clip in tile in profile properly.
6. Always use gloves at the time of installation.
7. Always check tile for stain and spot, if any there clean before installation.
2. Always installing the main c channel carrier 1-1.2 meter space.
3. Always use the suspension rod at a distance of 1-1.2meter.
4. Always insert a clip in tile in profile properly.
6. Always use gloves at the time of installation.
7. Always check tile for stain and spot, if any there clean before installation.
G.I. .5 mm thickness plain:-$ 11-13 per sq. meter.
Aluminum.7 mm thickness plain:-$ 16-18 per sq. meter.
S.S .5mm Thickness Plain-$ 33-35 per sq. meter
For different colors, the combination cost may be increased by $ 2 per sq. meter.
For different colors, the combination cost may be increased by $ 2 per sq. meter.
Perforation will add $2 in cost also.